The South Bend 21" Variable-Speed Gearhead Drill Presses with and without a cross slide table.
The South Bend 21" Variable-Speed Gearhead Drill Press.
The head features fine downfeed control, a forward/reverse spindle switch, 3-phase variable speed, and a digital spindle speed readout.
The #MT3 spindle of the SB1115 with 5" of travel.
Hand crank-operated rack-and-pinion table elevation control of the SB1115.
Column lock and hand crank-operated rack-and-pinion table elevation control of the SB1115.
The On/Off switch of the SB1115.
The South Bend 21" Variable-Speed Gearhead Drill Press with Cross Slide Table.
The head features fine downfeed control, a forward/reverse spindle switch, 3-phase variable speed, and a digital spindle speed readout.
The R8 spindle of the SB1116 with 5" of travel.
The power feed for the cross-slide table of the SB1116.
A handwheel of the cross-slide table with graduations in 0.001" increments.
The indented handle for manual vertical movement on the column.
A close-up of the column of the SB1116.
The On/Off switch of the SB1116.
Chucking a bit in the SB1116.
Unbeatable raw-drive power, performance and precision
These powerful, professional-level gearhead drill presses feature all the precision and high-end capability you need to put out your best work.
Available with or without a cross slide table with longitudinal and vertical power feed, each of these models is equipped with a variable-speed 3-phase motor with inverter that runs on single-phase, 220V power. This gives you greater speed ranges with a lower amp draw.
Additional features, such as a digital spindle speed readout on the headstock and a clutch-engaged downfeed function make these gearhead drill presses top of their class in design and functionality.
Whether you're looking for a basic high-end drilling machine, or you require the additional functionality of a cross slide table with power feed, you'll get everything you need with either of these South Bend gearhead drill presses.
Made in an ISO 9001 factory
21" Variable-Speed Gearhead Drill Presses
BOTH DRILL PRESSES FEATURE:
- Variable frequency drive for 3-phase speed control with single-phase power
- Powered or hand-crank enabled rack-and-pinion table elevation
- Coarse and fine downfeed controls
- Red anodized spindle stroke and table elevation handles
- Cast-iron base with two 1/2" T-slots, 8-7/8" on center
- 360 deg. table positioning around column
- 360 deg. head positioning around column
- Digital speed display
- Front-mounted emergency stop button
- Forward/reverse spindle switch
- US based customer service and technical support
SPECIFICATIONS:
- Power draw: 220V single-phase (converted from 3-phase through inverter), 5.5A
- Spindle travel: 5"
- Max. distance spindle to column: 10-7/16"
- Max. distance spindle to table: 17-3/8"
- Drilling Capacity: 1-1/2" (40mm) steel and cast-iron
- Two-range variable spindle speed: 0–350 RPM (Low) & 0–2500 RPM (High)
- Head travel: 13 -3/8"
- Head tilt: 30° Right / 90° Left
- Drill chuck type and size: JT6 key chuck, 1/64"–5/8"
SB1115 SPECIFICATIONS:
- Spindle taper: MT#3
- Drawbar thread size: M12 x 1.75
- Cross travel: 7"
- Table size: 19-1/2" L x 21-3/4" W x 2-1/4" T
SB1116 SPECIFICATIONS:
- Spindle taper: R-8
- Drawbar thread size: 7/16"-20
- Cross travel: 7-1/4"
- Table size: 23" L x 7-1/2" W x 1-3/4" T
Built to true South Bend high-precision industrial standards.
DOWNLOAD OUR SPECIFICATION SHEET FOR COMPLETE SPECIFICATIONS, TWO-YEAR WARRANTY AND ACCESSORY INFORMATION.
